Products related to Ignition:
-
MSD Ignition Universal Ignition Tester
This universal ignition tester provides simple and accurate testing of many different types of vehicle ignition system including single coil, coil pack or coil on plug applications. The unit has settings for 10 different crank sensor outputs to cover a range of engines from single cylinder to 12 cylinder.Large easy to read display with back light for low light useSuitable for most engine and ignition typesEasy connection to ignition systemSimple to navigate menu system with single control knobThe MSD ignition universal ignition tester has the ability to create an RPM run so you can see if any ignition activated devices are operating correctly such as rev counters or shift lights. It has a cam sync output for testing DIS / EFI systems and also has a battery voltage display. A spark plug tester and power grid adaptor harness are included.
Price: 431.05 £ | Shipping*: 6.95 £ -
MSD Ignition Digital 6A Ignition Control
An all new design based around the MSD 6A this latest digital 6A features a higher output (530v primary and 135mJ of spark energy) with less current draw. Installation is made easy with wiring being connected via a single sealed connector.Improves fuel combustion for increased engine performanceReduces engine emissionsImproves fuel economyMulti sparks every firing stroke up to 3000 rpm for improved throttle response and easier startingWhether you have a race, rally or performance road car, the powerful multiple sparks of the digital MSD 6A will ensure complete combustion. Benefits such as quicker times, easier starting, reduced plug fouling and more power can be expected with the digital 6A's high energy multiple sparks.Works with virtually any vehicle 12-18 volt electrical system. Triggered using breaker points, a magnetic pickup or the output of an electronic amplifier. All necessary parts and wiring instructions are included.Specifiactions:Current draw: 0.7 amp per 1000 RpmRpm Range: Up to 15,000 Rpm with 14.4 voltsPrimary voltage: 520-540 vSecondary voltage: 45,000 vSpark energy: 135-145 mJ per sparkDimensions: 302 x 102 x 46mm
Price: 326.83 £ | Shipping*: 6.95 £ -
MSD Ignition Blaster SS Ignition Coil
The Blaster SS coil from MSD Ignition is a compact design which is packed with performance. The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output.Improves ignition spark for better engine performanceIdeal for use with MSD ignitions and other distributor based electronic ignition systemsCompact housing made from tough material for improved reliabilityTo provide the best reliability the secondary windings are wound on a segmented bobbin which reduces the chance of voltage breakdown between the primary and secondary windings. For more protection, these windings are encased in a polyurethane compound for complete protection against vibration.Supplied with a 90° boot, terminal and vibration mounts the Blaster SS coil is a perfect addition to any electronic ignition system.Specifications:Inductance: 6.9 mHMaximum voltage: 40,000 vPeak current: 300 mAPrimary resistance: 0.355 OHMsSecondary resistance: 4.4K OHMsSpark duration: 220uSTurns Ratio: 70:1Weight: 1.08 lbs
Price: 101.57 £ | Shipping*: 6.95 £ -
MSD Ignition Blaster 3 Ignition Coil
The Blaster 3 coil from MSD ignition is an ideal upgrade for a stock coil and they are a perfect combination to use with MSD ignition control units. Designed to provide a better spark, the Blaster 3 coil features special 100:1 windings with a 45,000v output.Provides a better spark to improve performanceExtra tall tower design for improved spark isolation and coil wire connection90 Degree lead terminal and boot suppliedLow resistance and 100:1 turn ratio provide a powerful sparkThe blaster 3 ignition coil provides a stronger spark than a stock coil which can improve engine performance, provide better starting and also improve fuel economy. A ballast resistor is not required.Specifications:Inductance: 8mHMaximum voltage: 45,000 vPeak current: 140 mAPrimary resistance: 0.7 OHMsSecondary resistance: 4.5K OHMsSpark duration: 350uSTurns ratio: 100:1
Price: 87.04 £ | Shipping*: 6.95 £
-
What is the difference between flash point and ignition temperature?
The flash point is the lowest temperature at which a substance can vaporize to form an ignitable mixture in air, while the ignition temperature is the minimum temperature at which a substance will spontaneously ignite without the presence of an external ignition source. In other words, the flash point is the temperature at which a substance can produce enough vapor to ignite, while the ignition temperature is the temperature at which the substance will ignite on its own. Both are important safety measures for handling and storing flammable substances.
-
Is the ignition key stuck in the ignition lock of the S51?
No, the ignition key is not stuck in the ignition lock of the S51.
-
Is the ignition key stuck in the ignition switch of the S51?
Yes, the ignition key is stuck in the ignition switch of the S51.
-
What is the wiring of the ignition switch in a magneto ignition system?
In a magneto ignition system, the wiring of the ignition switch is relatively simple. The ignition switch is connected to the primary winding of the ignition coil, which is in turn connected to the magneto. When the ignition switch is turned on, it allows current to flow through the primary winding, creating a magnetic field in the coil. This magnetic field collapses when the switch is turned off, inducing a high voltage in the secondary winding of the coil, which then sends the spark to the spark plug. Overall, the ignition switch in a magneto ignition system serves to control the flow of current to the ignition coil, which is essential for generating the spark needed to ignite the fuel-air mixture in the engine.
Similar search terms for Ignition:
-
Ignition
Price: 15.49 £ | Shipping*: 3.99 £ -
Ignition
Price: 21.99 £ | Shipping*: 3.99 £ -
MSD Ignition 6AL-2 Programmable Electronic Ignition
The programmable 6AL-2 electronic ignition box provides a method of having tailored ignition curves on distributor based ignition systems. It is suitable for engine RPM up to 12,000 rpm and is easy to program on a PC or laptop using windows based software. Fully programmable ignition curves for distributor ignition systemsCaptive discharge technology provides maximum spark energy for optimum engine performancePlot boost timing maps to 0.1 percent per Psi accuracyStep retard for nitrous applicationsEasy to program using windows based pro-data softwareIn-built 2 step rev limiterThe MSD ignition 6AL-2 allows you to program ignition retarding for nitrous systems or to plot a boost timing curve for engines with forced induction or to set a curve to suit different camshaft characteristics. The unit features an in-built 2 step rev limiter with 100 RPM increments. The 2 step limiter allows for an upper rev limit to protect the engine and a lower limit suitable for launch control.
Price: 644.75 £ | Shipping*: 6.95 £ -
MSD Ignition Blaster High Vibration Ignition Coil
The Blaster high vibration ignition coil from MSD ignition is an ideal upgrade to your stock coil, or to compliment the performance of your MSD Blaster 6 Ignition. The coil internals are completely potted in a premium grade epoxy to protect them from vibrations making this coil perfect for competition use. The Blaster Coils are designed for improved spark output with special 100:1 windings to provide maximum build up of voltage for optimum performance.Ideal for high vibration applications such as MotorsportsImproves ignition spark and engine performanceSuitable for electronic ignition and MSD ignition systemsThe MSD ignition blaster high vibration coil is suitable for use with single coil based electronic ignition and MSD ignition systems. They can also be used with a contact breaker ignition system but a separate ballast resistor would need to be fitted.Specifications:Inductance: 8 mHMaximum voltage: 45,000 vPeak current: 140 mAPrimary resistance: 0.7 OHMsSecondary resistance: 4.5K OHMsSpark duration: 350 uSTurns ratio: 100:1
Price: 92.84 £ | Shipping*: 6.95 £
-
Are the ignition electrodes defective?
To determine if the ignition electrodes are defective, you can visually inspect them for any signs of damage or wear. Additionally, you can test the electrodes using a multimeter to check for continuity. If the electrodes do not show continuity, they may be defective and need to be replaced. It is also recommended to consult the manufacturer's guidelines or a professional technician for further assistance in diagnosing and resolving the issue.
-
Start button or ignition key?
The choice between a start button and an ignition key ultimately comes down to personal preference. Some people may prefer the convenience and modern feel of a start button, while others may appreciate the tactile feedback and traditional nature of an ignition key. Both options serve the same purpose of starting the vehicle, so it really comes down to what the individual finds more comfortable and convenient.
-
What is a strange ignition?
A strange ignition refers to an unusual or unexpected way in which something begins or starts. It can be used to describe a surprising or unconventional beginning to a process or event. For example, a strange ignition could be a sudden burst of creativity that leads to a new project, or an unexpected turn of events that kickstarts a chain of actions. It is a way of describing an unconventional or out-of-the-ordinary start to something.
-
Is this ignition set correctly?
Without more information, it is difficult to determine if the ignition set is correctly installed. It is important to ensure that all components are properly connected and secured, and that the ignition timing is set correctly. If you are unsure, it is best to consult the manufacturer's instructions or seek the assistance of a professional mechanic to verify that the ignition set is correctly installed.
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases.